Advertisement
3
2
1
1 RU
3
2
1
Balanced analog input connection
8
+
4
CH-B
2
8
+
4
CH-D
2
The cooling mode of the equipment is as follows:
Cold air is sucked through the ventilation holes of the front panel
and the heat is expelled from the rear panel. In order to ensure
good heat dissipation, please keep the equipment in the 0 ~40
degrees range and ensure that the front and rear panel airways are
clear.
If the temperature exceeds 85 degrees, output voltage will be
reduced. If the temperature continues rise to 90 degrees, the power
amplifier will be shut down. When the temperature drops back to a
safe temperature, the equipment will restart automatically.
After long term use, if the cooling effect becomes reduced, please
turn off the equipment and remove the front dust net cover
to clean out any dust that may have built up.
Non balanced analog input connection
CH-A/B connector
+
CH-C/D connector
D+
D-
C+
C-
+
8
4
CH-A
2
CH A&B
8
4
CH-C
2
CH C&D
Advertisement
