Milwaukee M12 FUEL 2530-20 Operator's Manual

Milwaukee M12 FUEL 2530-20 Operator's Manual

5-3/8" (136 mm) circular saw
Hide thumbs Also See for M12 FUEL 2530-20:

Advertisement

Quick Links

OPERATOR'S MANUAL
Cat. No.
2530-20
M12 FUEL™ 5-3/8" (136 mm) CIRCULAR SAW
WARNING
To reduce the risk of injury, user must read and understand operator's manual.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M12 FUEL 2530-20 and is the answer not in the manual?

Questions and answers

Summary of Contents for Milwaukee M12 FUEL 2530-20

  • Page 1 OPERATOR'S MANUAL Cat. No. 2530-20 M12 FUEL™ 5-3/8" (136 mm) CIRCULAR SAW WARNING To reduce the risk of injury, user must read and understand operator's manual.
  • Page 2: General Power Tool Safety Warnings

    GENERAL POWER TOOL moving parts. SAFETY WARNINGS • If devices are provided for the connection of dust Read all safety warnings, instruc- WARNING extraction and collection facilities, ensure these are connected and properly used. Use of dust collection tions provided with this power tool. Failure to follow all instructions listed below may result in electric shock, •...
  • Page 3: Specific Safety Rules For Circular Saws

    Do not use this tool if you do not understand these operating instructions or you feel the work is beyond operating procedures or conditions and can be avoided your capability; contact Milwaukee Tool or a trained by taking proper precautions as given below: •...
  • Page 4: Functional Description

    SYMBOLOGY Some examples of these chemicals are: Volts • lead from lead-based paint • crystalline silica from bricks and cement and other Direct Current masonry products, and Your risk from these exposures varies, depending on exposure to these chemicals: work in a well ventilated ASSEMBLY area, and work with approved safety equipment, such Recharge only with the charger...
  • Page 5: Adjusting Depth

    • If the guard still does not immediately spring back into place, contact a MILWAUKEE service facility Installing and Removing Blades the handle to the desired angle as indicated by the...
  • Page 6: Electric Brake

    • When restarting a saw in the workpiece, centre needs servicing by an authorized MILWAUKEE service are not engaged into the material. If saw blade is binding, it may walk up or kickback from the workpiece you must always wait for the blade to stop completely •...
  • Page 7: Maintenance

    Cross-Cutting Wood Cutting Masonry and Metal MILWAUKEE circular saws are not intended for con- does not recommend using bonded abrasive wheels Ripping Wood Dust, chips, and grit can cause WARNING guard to hang up at any time. If saw is used to cut masonry or metal, reserve and mark...

Table of Contents