Samsung SPP4251 Owner's Instructions Manual page 28

Your PDP can memorize and store alJ of the availab[e channels for both "off-air"
(antenna} and cane channels. After the available channels are memorized, use the
CH ,_ and CH v buttons to scan through the channels. This eliminates the need to
change channels by entering the channel digits. There are three steps for memorizing
channels: selecting a broadcast source, memorizing the channels (automatic / and
adding and de)eting channe)s (manua)).
Before your
tdevision can begin
memorizing the available channels, you must specify the type of signat
source that is connected to the PDP (i.e., an antenna or a cable system}.
Press the MENU button_ Press the _ or V button to
select "Channel", then press the ENTER button.
Press the ENTERbutton to select "Air/CATV'.
3 Press the A or T button to select "Air", "STD",
"HRC" or "IRC'L
o If you are connected to an antenna, leave "Air"
displayed. If you connected cable, press the
A or Ir button to the display the type of cable
system: "STD", "HRC" or "IRC".
(If you are nat sure which type of cable system you
have, contact your cable company !.
Press the MENU button to exit.
e STD, HRC and IRC identify various types of cable TV systems. Contact your IocaJ cable company to
identify the type of cable system that exists in your particuIar area. At this point the signaI source
has been selected. Proceed to "Storing Channds in Memory" (Next page}.
29