Champion 201260 Operator's Manual page 6

201260 - 1000 PORTAbLE POwER STATiON

– Do not overload the Power Station's capacity. Exceeding
the wattage/amperage capacity may damage the power
supply and/or electrical devices connected to it. Inductive
loads such as refrigerators with compressors, motor
powered equipment, and air conditioners may have much
greater starting wattage than their rated wattage.
– Do not connect Power Station output to a building's
electrical system.
– Do not use this unit if you do not understand these
operating instructions.
– Maintain the labels and nameplates on this Power Station.
These carry important information.

– Do not use a Power Station or appliance that is damaged
or modified. Damaged or modified internal batteries may
exhibit unpredictable behavior resulting in fire, explosion or
risk of injury.
– Do not remove cover. No user serviceable parts inside.
– Do not tamper or disassemble the Power Station to attempt
service or replace the battery. Incorrect reassembly may
result in a risk of fire, electric shock or personal injury.
– For service information please contact our Champion
Technical Support Team at 1-877-338-0999. Please have
your serial number and model number available when
service, repair or replacement is required.
– Never place fingers or hands inside the product.

– To reduce the risk of injury or damage, avoid contact with
any hot surface.
– Do not use the Power Station near sources of high heat or
fire. Exposure to fire or temperature above 265°F (130°C)
may cause explosion.
– Do not discharge the Power Station battery in
temperatures below 5°F (-15°C) or above 104°F (40°C).
– Do not allow fluids to flow into the Power Station. Corrosive
or conductive fluids, such as seawater, certain industrial
chemicals, and bleach or bleach containing products, etc.,
can cause a short circuit.
– Follow all charging instructions and do not charge the
Power Station outside the temperature range specified in
the instructions. Charging improperly or at temperatures
outside the specified range may damage the battery and
increase the risk of fire.
wARNiNG
wARNiNG
wARNiNG
iMPORTANT SAfETY iNSTRUCTiONS
When charging the Power Station:
– Always charge the Power Station's internal battery in a
well-ventilated area.
– Do not use the AC charging cable outdoors.
– Do not expose AC charging cable to oil, oil vapor, grease,
gasoline, gasoline vapors or other caustic substances that may
damage the AC charging cable.
– Do not charge the Power Station below 43°F (6°C) or above
104°F (40°C).
– Do not charge Power Station in rain, snow, damp or wet
locations.
– Do not overcharge the Power Station. Use only supplied AC
charging cable and follow solar charging guidelines and
voltage and current limits.
– Always connect to properly grounded outlets.
– Never use Power Station or charger in the presence of
explosive atmospheres (gaseous fumes, dust or flammable
materials).
– Never leave the Power Station unattended while charging.
If the internal battery smokes, or gives off an odor during
charging, terminate charging immediately.
– During charging, if the Power Station battery becomes hot to
the touch, stop charging. Allow Power Station to cool before
resuming.
– Always unplug charger when not in use.
– To reduce the risk of electric shock, always unplug charger
before cleaning or maintenance. Do not allow water to flow
into plug. Use a Ground Fault Circuit Interrupter (GFCI) to
reduce shock hazards.
Grounding Information:
If the Power Station should malfunction or breakdown, provides
a path of least resistance for electric current to reduce the risk
of electric shock. This product is equipped with a cord having an
equipment conductor and a plug. The plug must be plugged into
an outlet that is properly installed and grounded in accordance
with all local codes ordinances. We strongly recommend that you
consult with a qualified electrician to ensure compliance with local
electrical codes.
When storing the Power Station:
– This Power Station is intended to be stored indoors and shall
not be stored or left outdoors when not in use.
– Do not stack any items on top of the Power Station during
storage.
– Store your Power Station in a cool, dry place between 32°F
(0°C) and 104°F (40°C). The ideal storage temperature is 59°F
(15°C).
6