Labeling A Cd - Sony CDX-C680 Operating Instructions Manual

Erasing tracks in a programme
1 Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
Che ca
Che mo Rey
2S Fie
a murmooe —o eur FE nh Vta is
"P 1" shows Programme 1 is selected.
if you have labelled the disc, the bank edit
mode appears. Press @) (PLAY MODE) to
display "P 1" above.
To select Programme 2, press G) (—)
repeatedly until "P 2" appears.
2 Press (2) («) or G) (>) to select the.
track you want to erase.
Track slot number
The track rcerenty registered in slot 6 of
Programme 1.
3 Press () (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
DELst(' )3'
psc
= = Pia
- PUY MODE => ENTER
+ To continue erasing tracks, repeat steps
2 and 3.
wi
When you finish erasing tracks, press (4)
(PLAY MODE) for two seconds.
) Press (SHIFT).
a ee ee ee
Labeling a CD
— Disc Memo (CD unit with the custom file
function)
You can label each dise with a personalized
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name (page 25) and select the specific
tracks for playback (page 25).
1 Play the CD and press for two
seconds.
2 Enter the characters.
@ Rotate the dial clockwise to select the
desired characters.
(A> B+C>--Z30>1-2-4
_! Cea
coe <*
If you rotate the dial counterclockwise,
the characters appear in the reverse
order.
Tf you want to put a blank space
between characters, select "_" (under-
bar).
@ Press (5) (>) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press (2) (+-), the flashing cursor
moves to the left.
© Repeat steps @ and @ to enter the
entire name.
3 To return to normal CD playback mode,
press for two seconds.
Tip
To erase/correct a name enter "_" (under-bar) for
each character.
HUN GW/QD id
23