Cd Player - Philips MAGNAVOX AZ 1207 Owner's Manual

ysijiug
CD PLAYER
Playing a CD
1 Set the POWER control to CD.
2 Press A OPEN to open the CD compartment.
3 Insert an audio CD (printed side up) and close the CD
compartment.
— The CD player starts and scans the contents list of the CD.
Then, the CD player stops. Display indication: the total
number of tracks.
4 Press the PLAY-PAUSE Dil button to start CD play.
— Display indication: the current track number.
5 Press the STOP O button to stop CD play.
— Display indication: the total number of tracks.
You can interrupt CD play by pressing PLAY-PAUSE Pl. Continue
CD play by pressing the button again.
— Display indication: the current track number flashes.
Note: CD play will also stop if:
— you open the CD compartment,
— the end of the CD is reached, or
— you move the POWER control to TUNER or TAPE.
If you make a mistake when operating the CD player, or if the
CD player cannot read the CD, the display shows £ or ma. (See
"TROUBLESHOOTING".}
If you press PLAY-PAUSE PII and there is no CD inserted, the
display shows no. |
Environmental information
All redundant packing material has been omitted. We have tried to make the packaging easy to
separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your set consists of materials which can be recycled if disassembled by a specialized company.
Please observe the local regulations regarding the disposal of packing materials, dead batteries
and old equipment.