Cd Player - Philips AZ1010/10 Instructions For Use Manual

Playing a CD
1 Set the POWER slider to CD.
2 Press / OPEN to open the CD compartment.
3 Insert an audio CD (printed side up) and close the CD
compartment.
™ The CD player starts and scans the contents list of the CD.
Then, the CD player stops. Display indication: the total
number of tracks.
4 Press the 2; button to start CD play.
™ Display indication: the current track number.
5 Press the 9 button to stop CD play.
™ Display indication: the total number of tracks.
You can interrupt CD play by pressing 2;. Continue CD play by
pressing the button again.
™ Display indication: the current track number (flashing).
Note: CD play will also stop if:
– you open the CD compartment,
– the end of the CD is reached, or
– you move the POWER slider.
If you make a mistake when operating the CD player, or if the
CD player cannot read the CD, the display shows E or no. (See
"TROUBLESHOOTING".)
If you press 2; and there is no CD inserted, the display
shows no.

CD PLAYER

7