Inserting Batteries; Installing The Remote Control Holder; Operating Method - LG New Hybrid E05NXA S40 Owner's Manual

INsERTING BATTERIEs

Insert batteries before using the remote control.
The battery type used is AAA (1.5 V).
1. Remove the battery cover.
2. Insert the new batteries and make sure that the
(+) and (-) terminals of the batteries are installed
correctly.
3. Reattach the battery cover.
!
NOTE
• If the display screen of the remote control
starts to fade, replace the batteries.
INsTALLING THE REMOTE CONTROL
HOLDER
Install the holder where there is no direct sun-
light to protect the remote control.
1. Choose a safe and easily-accessible place.
2. Fix the holder by fastening the 2 screws firmly
with a screwdriver.
3. Slide the remote control into the holder.

OPERATING METHOD

Point the remote control towards the signal receiver
at the bottom of the air conditioner to operate it.
*The feature can be changed according a type
of model.
!
NOTE
• The remote control may operate other electronic
devices if pointed towards them. Make sure to
point the remote control towards the signal
receiver of the air conditioner.
• For proper operation, use a soft cloth to clean
the signal transmitter and receiver.
9
BeFOre USe