Technical Specifications - Crate QuadraDrive GT-80D Owner's Manual

GT-80D

TECHNICAL SPECIFICATIONS:

Output Power Rating
Gain
Tone Control Range
Overdrive Channel
Clean Channel
Signal To Noise Ratio
Overdrive Channel
Clean Channel
Input Impedance
Maximum Signal Accepted
Driver Tube Type
Output Device Type
Line Out Level
Internal Speaker
Power Requirements
Size and Weight
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications and information in this manual are subject to change without notice.
The GT-80D is covered with a durable black Tolex
clean with a damp lint-free cloth to remove dirt and road film. Never spray cleaning agents directly onto
the cabinet, and stay away from abrasive cleansers which could damage the finish.
©1997 SLM ELECTRONICS • A division of St. Louis Music • 1400 Ferguson Avenue • St. Louis, Mo 63133
QuadraDrive
tm
Low
Mid
High
Low
Mid
High
Solid State
Tube
Solid State
Tube
Size
Type
Magnet
Voice Coil
RMS Rating
Impedance
80 watts RMS @ 5% THD 8 ohm load, 120 VAC
88dB, tones @ "5" @ 1kHz
24dB range @ 100Hz
10dB range @ 1kHz
20dB range @ 5kHz
23dB range @ 100Hz
14dB range @ 800Hz
30dB range @ 10kHz
61dB
57dB
81dB
72dB
1M ohm
3V peak to peak
12AX7A (1), 12AU7 (2)
MOSFETs
0.7V RMS nominal
12"
Crate Custom-L
34 oz
1.75"
80 watts
8 ohms
115V 60Hz, 100VA
100/115VAC, 50/60Hz, 100VA
230VAC, 50/60Hz, 100VA
17"H x 21.25"W x 10.75"D, 40 lbs.
® material. To keep the cabinet in top condition, wipe it
P/N 47-480-01 • 05/97