Toyotomi Oil Miser OM-180 Installation Manual page 15

8. Slide the insulating cloth cover over the flexible exhaust pipe and the flexible bent joint.
NOTE: When disconnecting the extension pipe (such as flexible pipe and flexible
bent joint), turn clockwise and pull apart.
9. Remove the screw from the exhaust mouth of the unit. Insert the flexible exhaust pipe to the exhaust
mouth and secure them with the screw.
NOTE: Seal all connections of the pipes with the aluminum tape.
10. Connect rubber joints to the both ends of the inlet hose.
11. Place the hose bands on the rubber joints and attach the hose as shown below. Tighten the bands.
Insulating
cloth cover
Rubber joint Rubber joint
Inlet hose
Hose band
Hose band
14