SETTINGFURTHERCHANNELS
Antennasettings,SCRsystem
andsearchingfordigitalchan-
nelsfromasatelliteautomati-
cally
Notes:
Your TV supports SCR system (Single Chan-
7
nel Router – EN 50494).
The following description about the LNB set-
7
tings premise a substantial expertise about
the satellite systems. Ask your specialist
dealer.
1
Open the menu with »MENU«.
2
Select menu item »Settings« with »
<
>
»
« or »
« and press »OK« to confirm.
3
Select the menu item »Source« with »
<
»
« and press »
V
– » Source« menu is active.
4
Select the line »Automatic Channel Search«
with »
« or »
« and press »OK« to
V
Λ
confirm.
5
Select the option »Satellite (DVB-S/S2)«
with »
« or »
« and press »OK« to
V
Λ
confirm.
6
Select the line »Antenna Settings« with »
or »
« and press »OK« to confirm.
Λ
– T he »Antenna Settings« menu is dis-
played.
7
Select and set the required option for the
antenna settings with »
Satellite
Press »OK« then select the required satel-
lite with »
« or »
V
confirm.
LNBtype
If your antenna system is equipped with a
single-cable system multiswitch, use the op-
tion »Grundig SCR«. Press »OK« and select
the »Grundig SCR« option with »
Select the »LNB-Frequency High« line with
»
« and enter the frequency with »1...0«
V
in five digits.
«, »
V
>
« or
« to confirm.
« or »
«:
V
Λ
« and press »OK« to
Λ
<
« or »
-----------------------------------------------------
Select the »LNB-Frequency Low« line with
»
« and enter the frequency with »1...0«
V
in five digits.
Confirm the settings with »
LNBselection
Depending on the number of LNBs, select
the option with »
»1/2« if only 1 LNB is used; if two LNBs
are used, select the required LNB
(»1/2« or »2/2«).
Userband
Select the number of the antenna socket
used with »
UBfrequency(MHz)
«,
Λ
Enter the required frequency for the selected
antenna socket with »1...0«.
Notes:
Use installation equipment supported / sug-
7
gested by your SCR Switch.
Other users / receivers connected to the
7
system may be affected if the specified user
band number and frequency is changed
during installation.
User band and user band frequency is
7
specified on the SCR switch used; and each
user / receiver must select a specified user
«
V
band and user band frequency.
With SCR satellite system, auto search by
7
several users / receivers at the same time
may cause problems.
8
Exit the antenna settings with »
9
Select the Channel Type.
Press »
V
want to search for only digital channels
(Digital) or only radio channels (Radio) or
both (Digital + Radio) and press »OK« to
select and mark or unmark the »Digital«
and/or »Radio« items.
10
Select Scan Mode.
>
To select whether you want to search for
«.
only free digital television channels (Free),
only scrambled digital television channels
(Scrambled) or both (Free + Scrambled),
press »
V
and mark or unmark the »Free« and/or
»Scrambled« items.
« (green).
<
>
« or »
«.
<
>
« or »
«.
« or »
« to select whether you
Λ
« or »
« and press OK« to select
Λ
ENGLISH
« (blue).
93