Advertisement
UNASSEMBLED
PARTS
Key
(2) Keys
(1) Oil Drain Tube
Slope Sheet
ASSEMBLY
Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping
puposes.
When right or left hand is mentioned in this manual, it means
when you are in the operating position (seated behind the
steering wheel).
TO REMOVE TRACTOR
FROM
CARTON
ADJUST SEAT (See Fig. 2)
•
Sit in seat.
•
Lift up adjustment lever (A) and slide seat until a com-
fortable position is reached which allows you to press
clutch/brake pedal all the way down.
•
Release lever to lock seat in position.
UNPACK CARTON
•
Cut along dashed lines on all four panels of carton.
Remove end panels and lay side panels flat.
•
Remove mower and packing materials.
•
Remove protective materials from tractor hood and
grille.
IMPORTANT: Check for and remove any staples in skid
that may puncture tires where tractor is to roll off skid.
CHECK BATTERY (See Fig. 1)
•
Lift hood to raised position.
NOTE: If this batte ryis put into service afte r month and year
indicated on label (L) (label is located between terminals)
charge battery for minimum of one hour at 6-10 amps.
(See "BATTERY" in Maintenance
section of this manual
for charging instructions).
FIG. 1
FIG. 2
NOTE: You may now roll or drive your tractor off the skid.
Follow the appropriate instruction below to remove the
tractor from the skid.
_IbWARNING: Before starting, read, understand and follow
all instructions in the Operation section of this manual. Be
sure tractor is in a well-ventilated area. Be sure the area in
front of tractor is clear of other people and objects.
TO ROLL TRACTOR
OFF SKID
(See Op-
eration section for location and function
of
controls)
•
Press lift lever plunger and raise attachment lift lever
to its highest position.
•
Release parking brake by depressing clutch/brake
pedal.
Advertisement
