Ward GIL-39007A Owner's Manual page 12

FORWARD DRIVE BELT „=
l
UPPER
Set the input pulley belt finger within 1/16" to M' of
a FINGER
the pulley surtace with belt fully engaged.
IDLER ARM
ASSEMBLY
INPUT PULLEY |
ир
BELT STRETCH (B
To replace the forward drive belt:
1. Remove the belt guard.
2. Unhook the long end of spring from the idler
arm assembly, Fig. 16.
3. Remove the input pulley belt finger, Fig. 16
4. Remove the belt finger from the idler roller,
Fig. 16.
LOWER
BELT FINGER
FIG. 16
To replace the reverse drive belt:
. Remove the belt guard.
23. Unhook the long end of spring from the idler
arm assembly, Fig. 16.
3. Remove the input pulley belt finger, Fig. 16.
5. Remove the reverse drive belt. Notice how the
reverse belt is twisted around the pulleys, Fig.
4. Remove
the belt finger from the idler roller,
16.
Fig. 16.
6. Remove the forward drive belt from pulleys and
5. Remove the reverse drive belt from pulleys and
replace with new belt, Fig. 16.
replace with new belt, Fig. 16. Notice how the
reverse belt is twisted around the pulleys, Fig.
7. Replace the reverse drive belt.
16.
$, Replace the belt finger onto the idler roller.
6. Replace the belt finger onto the idler roller.
9. Replace the input pulley belt finger,
7. Replace the input pulley belt finger.
12. Replace the belt guard. 10. Replace the belt guard.