Advertisement
Advertisement
Table of Contents
Related Manuals for PSI AC 710
Summary of Contents for PSI AC 710
- Page 2 This document and its parts can be copied or provided to a third party only with the express permission of PSI. The contents of this manual have been verified to correspond to the specifications of the device. However, deviations cannot be ruled out.
- Page 3 ABLE OF ONTENTS Warnings and Safety Precautions ......................4 General Description ..........................4 Cooling Unit AC 710 Equipment ........................4 Installation ............................5 Warranty Conditions ..........................7 Page | 3...
- Page 4 ESCRIPTION Additional Cooling Unit AC 710 is designed to regulate temperature of MC water bath in the extended range, down to 15 °C with the resolution of ± 1 °C at standard laboratory conditions. This accessory device is also recommended for applications requiring high light intensities as some heating of the water bath by the LEDs always occurs.
- Page 5 Fig. 1 A) AC 710 water pump. B) Four circular rubber seals. C) Water outlets on the top of the Hailea water chiller. D-H) Installation of the water pump to the water chiller. G) Connection of the Cooling Unit AC 710 with the Multi-Cultivator using AUX cable.
- Page 6 (Fig. 2C). 10. Unscrew the top cover of the AC 710 water pump reservoir and fill it with water (Fig. 2A). 11. Switch ON the cooling pump via MC front control display: Settings > Cooler > ON (Fig. 3). The active pump circulates the cold water in the water-cooling circuit and stops automatically after 2 minutes.
- Page 7 PSI. Warranty term for the European Union member states is two years. 2. If at any time within this warranty period the instrument does not function as warranted, return it and PSI will repair or replace it at no charge.
Need help?
Do you have a question about the AC 710 and is the answer not in the manual?
Questions and answers