CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk ALPINE LED EXIT SIGN These instructions contain important information regarding safety. They should be read carefully and should be retained for future reference. The company will not accept any responsibility for any injury, damage or loss which may arise due to incorrect installation, operation or maintenance due to non-adherence to these instructions.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk INSTALLATION Installation should only be carried out in accordance with the current edition of the "Regulations for Electrical Installations" EN61547 and with the requirements of BS EN 60598-1 Do not high voltage insulation test the luminaire as this may damage the control gear Before starting the installation ensure that the electricity supply is isolated and that it can not be re-energised accidentally.
Page 4
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk TESTING Recommended Routine Test Procedure The following test is designed to ensure the continued protection of your premises and occupants. Because of the possibility of a failure of the normal lighting supply occurring shortly after a period of testing, all tests should, whenever possible, be undertaken at times of least risk, e.g.