Related Manuals for oviala ATHENES
Summary of Contents for oviala ATHENES
- Page 4 Step 6 Located holes in *Place centre lou size.* Place centre lou...
- Page 5 Step 6 Located holes in centre of beams( and ) into 12th slot, lining up w *Place centre louver size.* Place centre louver into 16th slot, lining up wi Using M10 nut X2, secure the louver in place Place Driving louver in line with 4th slot on the Fit all common louvers X21 for 300x300cm...
- Page 6 th the holes for 300x300cm h the holes for 300x400cm. beam and . X30 for 300x400cm size into 0x300cm x400cm. One for each other of the slats is required.
- Page 8 Place Driving lou Fit all commo the remainin...
- Page 9 Using M10 nut X2, secure the louver in place in line with 4th slot on the beam and . Place Driving louver in line with 4th slot on the beam and . Fit all common louvers X21 for 300x300cm and X30 for 300x400 louvers X21 for 300x300cm and...
- Page 10 *Use bolt x46, plastic spacer x46 and nut x46 to tighten for 300x300 cm Use bolt x64, plastic spacer x64 and nut x64 to tighten for 300x400 cm Secure the louvers at each end. cm size into 400cm size into NOTE: Do not over tighten.
- Page 11 2660 3730 2960 4030 is used along...
- Page 12 x 2 (flat L-shap...