Maxwell 3 Manual

Maxwell 3 - Sennheiser DW Series

Introduction

Here we describe how the Sennheiser DW Series are connected to the Maxwell 3.

Connecting Base Station to the Maxwell

Use a normal 8 pin Ethernet cable (17)
Connect to the Sennheiser Base station
Connect to the Maxwell 3

Sennheiser DIP switch settings

Set the DIP switch 1

Adjusting the audio signal

Set the ABC switch (6) to
Phone socket.(8)
EHS socket (6).
and 4 to the lower position.
A (Default), B or C so that you can hear a clear signal.