Network Stack Configuration - C&T Solution VCO-6000-ADL User Manual

Chapter 3: BIOS Setup

3.3.14 Network Stack Configuration

Item
Network Stack
IPv4 PXE Support
IPv4 HTTP Support
IPv6 PXE Support
IPv6 HTTP Support
PXE boot wait time
Media detect count
Options
Disabled[Default] ,
Enabled
Disabled[Default] ,
Enabled
Disabled[Default] ,
Enabled
Disabled[Default] ,
Enabled
Disabled[Default] ,
Enabled
0[Default]
1[Default]
VCO-6000-ADL l User's Manual
Description
Enable/Disable UEFI Network Stack.
Enable/Disable IPv4 PXE boot support. If
disabled, IPv4 PXE boot support will not be
available.
Enable/Disable IPv4 HTTP boot support. If
disabled, IPv4 HTTP boot support will not be
available.
Enable/Disable IPv4 PXE boot support. If
disabled, IPv6 PXE boot support will not be
available.
Enable/Disable IPv6 HTTP boot support. If
disabled, IPv6 HTTP boot support will not be
available.
Wait time in seconds to press ESC key to
abort the PXE boot. Use either +/- or numeric
keys to set the value.
Number of times the presence of media will
be checked. Use either +/- or numeric keys to
set the value.
96