Product Overview; Specifications; Attachments/Accessories; Operation - Toro Recycler 20961 Operator's Manual

Product Overview

1. Handle
2. Self-propel bar
3. Blade-control bar
4. Adjustment for the
self-propel drive
5. Rear deflector (not shown) 13. Bag-on-demand lever
6. Washout port (not shown) 14. Handle lock (2)
7. Fuel-tank cap
8. Air filter
1. Grass bag
Figure 7
9. Cutting-height lever (4)
10. Spark plug
11. Side-discharge deflector
12. Oil-fill tube/dipstick
15. Recoil-start handle
Figure 8
2. Side-discharge chute

Specifications

Model Weight
35 kg
20961
(77 lb)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.

Operation

g272915
Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
Always shut off the machine, wait for all moving
parts to stop, and allow the machine to cool before
adjusting, servicing, cleaning, or storing it.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Check that all guards and safety devices, such as
deflectors and/or grass catcher, are in place and
g036586
functioning properly.
•
Always inspect the machine to ensure that the
blades and blade bolts are not worn or damaged.
•
Inspect the area where you will use the machine,
and remove all objects that could interfere with
the operation of the machine or that the machine
could throw.
•
Contact with the moving blade will cause serious
injury. Do not put your fingers under the housing
when adjusting the cutting height.
8
Length Width Height
152 cm 58 cm
(60 (23
inches) inches)
104 cm
(41
inches)