Installation Procedure (continued)
Installing the USB Driver (for Windows 98 only)
Install this driver when the USB cable is used. (The USB driver provided on the CD-ROM is exclusively
for Windows 98. Installing the USB driver for use in Windows 2000/ME is not necessary.)
Connect one end of the USB cable to the DIGITAL terminal on the PDR-M81.
Connect the other end of the USB cable to your
personal computer or to the USB port on the USB
hub.
Connect the USB cable with Windows 98 already booted up.
Set the mode dial to [
].
The Add New Hardware Wizard screen appears.
Click the Next button.
- 11 -