Seat; Adjusting The Front Fork - Yamaha MT-10 SP 2016 Owner's Manual

Seat

To remove the seat
1. Open the seat lock cover, insert
the key into the seat lock, and then
turn the key counterclockwise.
3
1
2
1. Seat lock
2. Seat lock cover
3. Unlock.
2. While holding the key in that posi-
tion, lift the rear of the seat up, and
then pull the seat off.
To install the seat
1. Insert the projections into the seat
holders as shown.
EAU57991
1
2
1. Projection
2. Seat holder
2. Push the rear of the seat down to
lock it in place.
3. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.
Instrument and control functions

Adjusting the front fork

This model is is equipped with ÖHLINS
electronic racing suspension.
The compression and rebound damp-
ing forces are electronically adjusted.
(See ERS on page 4-16.)
2
NOTICE


Spring preload
The spring preload adjustment is per-
formed manually.
4-33
Use extra care to avoid scratch-
ing the gold-anodized finish
when making suspension ad-
justments.
To avoid damaging the suspen-
sion's internal mechanisms, do
not attempt to turn beyond the
maximum or minimum settings.
1. Turn the vehicle off.
2. Slide the rubber cover back at
each coupler.
3. Remove the coupler on each front
fork. NOTICE: To prevent dam-
aging the couplers, do not use
sharp tools or
EAU67383
1
2
3
ECA22471
4
5
6
7
8
9
10
11
12
excessive