Table of Contents
Advertisement
Chapter 2 - Adjusting
Figure 2-1. Positioning the viewfinder
left rotation
knob (1)
2.1.2 Tilt
The viewfinder can be tilted very low when the camera is in a high position:
1.
Hold the left rotation knob (1) with your left hand and loosen the right rotation knob (2)
with your right hand.
2.
Tilt the viewfinder to the desired angle using the handgrip (3).
3.
Fasten the right rotation knob (2) to fix the position.
2.1.3 Lift
1.
Pull out the vertical position knob (4) with your left hand and lift the handgrip (3) with your
right hand.
2.
The vertical postion can be set to four fixed postions with the vertical position knob (4).
3.
Choose the desired postion and release the knob until it clicks.
2.1.4 Rotate
The unit can rotate 90 degrees to the right and 180 degrees to the left. When rotated to the left
the viewfinder can be used to set up the lens while still observing the viewfinder picture.
1.
Loosen the rotation locking wheel (5) and use the handgrip (3) to rotate the viewfinder.
2.
Fasten the rotation locking wheel (5) to fix the position.
14
right rotation knob (2)
(not visible)
lift
rotate
vertical position knob (4)
LDK 4020 SDTV 7-inch high brightness viewfinder - User's Guide (v1.0)
rotation locking wheel (5)
sunhood
tilt
handgrip (3)
Advertisement
Table of Contents
