Technics SD-S947 Operating Instructions Manual page 12

Connection of front speakers
Connection of surround speakers
Right speaker
\
e
\
Left speaker
Right speaker
15mm_
Left speaker
r
SURROUND
/
Speaker cables /
J
\
_ p
0
m
1
15 mm
(19/32")
4, Twist
2
m
To prevent damage to circuitry,
never short-circuit positive (+) and
negative (-) speaker wires.
• Speaker impedance
The impedance of any speaker used with t_is unit must be 8 Q.
Caution
Use these speakers only with the recommend-
ed system. Failure to do so may lead to dam-
age to the amplifier and/or the speaker, and
may result in the risk of fire. Consult a qualified
service person if damage has occurred or if
you experience a sudden change in perfor-
mance.
Soundwillonlycomeoutwhenthe SURROUNDmodeof the Dolby
ProLogicSystemor SFC function ison.
If onlyone of the surround speakersis connected, no sound will
comeout.Besureto connect bothspeakers.
• Speaker impedance
The impedance of any speaker used with this unit must be 4-8 _.
Connection of center speaker
Center speaker
__t15mm (19/32")" I
_J_ " Insert
rcable
Sound will only come out when the LIVE or THEATER mode of the
SFC function or Dolby Pro Logic System is on.
• Speaker impedance
The impedance ofany speakerusedwiththisunitmustbe 8 Q-