Gtaw - Lincoln Electric Global UI Manual

1
Figure 4
1. "Main Menu" access, push this button to go back in
order to change process or go to System Options.
2. Push button to configure all parameters of current
process.
Turn the knob to adjust the welding current value.
3. "Memories" access. See ʺMemoriesʺ subchapter.

GTAW

Figure 5
To choose TIG mode process, select GTAW icon and
push the knob button.
Settings pages
In Home menu, push knob to select "Settings".
Figure 6
English
2 3
Start Mode selection:
Icon
High Frequency arc striking
Touch Start arc striking
In HF mode, a high voltage will allow arc striking.
In Touch Start, user has to touch welding piece with
electrode and lift torch to create arc.
Weld Sequence :
In this section, user will configure all TIG cycle
parameters:

Preflow time

Start current

Ramp-up time

Current value

Slope-down time

Finish current

Postflow time
If pulse mode is activated, additional parameters will be
available:

Frequency

Duty cycle

Background current.
2
Description
Figure 7
Figure 8
English