Installation Recess - Electrolux Dometic RM 6270 Manual

6.6

Installation recess

The refrigerator must be installed draught-free in a recess.
The measurements of the recess are given in the table below.
Step (A) is only required for cabinets with a step. Push the appliance far enough into
the recess until the front edge of the refrigerator casing is flush with the front of the
recess. Allow a gap of 15-20 mm between the back wall of the recess and the
refrigeration unit. The floor of the recess must be level, allowing the appliance to be
pushed easily into its correct position. The floor must be substantial enough to bear the
weight of the appliance.
Ensure that the refrigerator is installed level in the recess.
Recess measurements:
Model
RM 6270
RM 6271
RM 6290
RM 6291
RM 6360
RM 6361
RM 6400
RM 6401
Width of recess = W
Hight H
825 mm
825 mm
825 mm
825 mm
825 mm
825 mm
825 mm
825 mm
Width of recess = W
Width W Depth T
490 mm 515 mm
490 mm 515 mm
529 mm 515 mm
529 mm 515mm
490 mm 515 mm
490 mm 515 mm
529 mm 515 mm
529 mm 515 mm
21
Hight HSt Depth TSt
220 mm 235 mm
220 mm 235 mm
220 mm 235 mm
220 mm 235 mm
- -
- -
- -
- -