Page 1
COMMERCIAL OPERATOR’S MANUAL 56 VOLT LITHIUM-ION COMMERCIAL STRAIGHT EDGER MODEL NUMBER EDX2000 WARNING: To reduce the risk of injury, the user must read and understand the Operator’s Manual before using this product. Save these instructions for future reference. MNL_EGO_EDX2000_AV01.01_230608...
We recommend a Wide Newton Blowing force Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS STRAIGHT EDGER — EDX2000...
Disconnect the plug from the power source and/ If operating a machine in a damp location is or remove the battery pack, if detachable, from the unavoidable, use a residual current device (RCD) 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS STRAIGHT EDGER — EDX2000...
Page 8
Damaged or modified batteries ◾ Always be sure of your footing on slopes. may exhibit unpredictable behaviour resulting in fire, ◾ Walk, never run. explosion or risk of injury. 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS STRAIGHT EDGER — EDX2000...
Weight (Without battery with tube) 4.7 kg eyes or skin. It may be toxic if swallowed. Guaranteed sound power level LWA 92 dB(A) 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS STRAIGHT EDGER — EDX2000...
Edging around walkways, curbs, flower beds, and blade guard has been set at the factory so that the other similar areas. arrow on the blade guard and the open side point away 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS STRAIGHT EDGER — EDX2000...
The battery-status indicator and the speed indicator will illuminate when the machine is started or the speed mode WARNING: Clear away all obstacles and solid objects button is pressed. from the work area. 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS STRAIGHT EDGER — EDX2000...
Always walk forward when cutting and move the edger the machine. forward. Do not pull the edger towards you. ◾ Use the sight line to line the blade up with the edge of the bed (Fig. K). 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS STRAIGHT EDGER — EDX2000...
Bend the two ends of the with an EGO™ edger blade. pin in opposite directions with needle nose pliers (not included) (see Fig. L). NOTICE: Replace the blade if its length is no longer 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS STRAIGHT EDGER — EDX2000...
Page 14
◾ Keep the air vents free of obstructions. STORAGE ◾ Remove the battery pack from the edger. ◾ Clean the machine thoroughly before storing it. 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS STRAIGHT EDGER — EDX2000...
◾ ◾ Motor fails to The battery is depleted. Charge the battery pack with EGO chargers listed in this start. manual. ◾ ◾ The lock-off lever is not Move the lock-off lever forward and hold it, then depress the moved forward before trigger to turn on the edger.
The warranty applies to the original purchaser and applies only to purchases made from authorised EGO Dealers, which can be confirmed on the website store locator. For avoidance of doubt, 3rd party online stores such as eBay, Gumtree, Amazon, etc. are excluded.
Page 17
STX3800, HTX7500, CSX3000, PPX1000, PSX2500, PTX5100, BHX1001, STX4500, 5 years 2 years BCX4500, EDX2000, HTX5300-P, HTX5300-PA, LBPX8000 Commercial Backpack Battery: BAX1501 3 years 2 years Commercial Charger: CHX5500E 3 years 2 years 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS STRAIGHT EDGER — EDX2000...
Need help?
Do you have a question about the EDX2000 and is the answer not in the manual?
Questions and answers