Kohler HARTLAND K-11021T-1S Installation Instructions

BEFORE YOU BEGIN BEFORE YOU BEGIN
Observe all local plumbing and building codes.
Prior to installation, unpack the new sink and inspect it for
damage. Return the sink to its protection carton until you are
ready to install it .
Inspect the waste and supply tubing; replace if necessary.
CAUTION: Risk of personal injury or product
damage. Cast iron sinks are very heavy. Get help
lifting the sink into place.
For a replacement installation, make sure the existing cutout
is the same size or smaller than the cutout for the new sink.
This sink is not intended for undercounter installation.
Please leave these instructions with the consumer; they
contain important care, cleaning, and warranty information.
WARNING
PRODUCT WEIGHT: 35KG.
BEFORE YOU INSTALL NEW SINK, PLEASE BUILD
A PROPER STRUCTURE TO SUPPORT THE SINK.
RECOMMENDED TOOLS AND MATERIALS RECOMMENDED TOOLS AND MATERIALS
·
Sealant
·
Pencil
·
Tape Measure
·
Putty Knife
·
Sharp Knife or Scissors
·
Saber Saw or Keyhole Saw
·
Drill and 13mm Drill Bit
·
Safety Glasses
·
Masking Tape
·
Rags or Paper Toweling
·
Pipe wrench
1045199-T01-A
·
·
·
·
·
·
·
13mm
·
·
·
·
368 201419
ã
Copyright Kohler China Ltd., 2004
C
1
HARTLAND
INSTALLATION INSTRUCTIONS
SR CAST IRON KITCHEN SINK
K-11021T-1S/2S/4S
35
, 2004