Sony CDP-991 Operating Instructions Manual page 11

Telicelatir:) splay
Checking the total number of selections and total play
time
There are two ways.
a) Place your disc on the tray and then either press & to
automatically close the tray or manually close it.
b) Press TIME/MEMO (or TIME on the remote
commander) during stop.
Total number Total
of selection time
laying "a calendar
aja[slas-
i ce
If disc contains more than 20 selections
D appears in the display window behind 20 on the music calendar.
00.
Checking the remaining playing time
Each time you press TIME/MEMO (or TIME on the remote
commander) during play, the display changes to give you
the following information.
Selection number lapsed playing time
gute
Index number ¥
Remaining time
in a selection
rack woes
a]
Teo
=
lf the current selection number is over 24, "----~ 7
is displayed.
Remaining number
of selections
*It "----- " is displayed instead of the remaining
time
- You have played a disc containing more than 24
selections in the shuffle or delete play mode.
-— You have programming more than 24.
To change the parts of information display |
Each time you press DISPLAY MODE on the remote
commander during play, the display changes to give you
the following information.
Entire display appears. —_,
|
Track number, index number
and playing time appear.
{
Entire display disappears. ——
To adjust the brightness of the display 2
- DIMMER function
Press REPEAT while holding down on TIME/MEMO. The
brightness adjustment has three tones. The tone you select
will be stored in memory so that you do not have to adjust
it again after turning the power off.
Note
The time display mode selected with the TIME/MEMO button will not change
unti] the power is turned off.
If you have stored a disc memo
The stored disc memo will be displayed, following the display of the
remaining time of the disc.
14