Operating The Product - Ryobi OSS1800 Manual

OPERATING THE PRODUCT

1. Install the battery pack. Make sure that
the latches on the battery pack click into
place.
2. Pour the fertiliser or seeds into the
hopper.
NOTE: For small materials, use settings 1
and 2. For large materials, use settings 3, 4,
and 5.
3. Adjust the flow rate by turning the material
flow rate adjustment knob clockwise or
counterclockwise.
NOTE: Always check the dispersion rate
on the packaging of the material you are
using.
4. Squeeze and hold the trigger to turn on
the product.
1
2
3
4
9
Operation