Additional Safety Warnings - Ryobi OSS1800 Manual

Hide thumbs Also See for OSS1800:
Table of Contents

Advertisement

Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that safety of the power tool is maintained.
FERTILISER AND SEED SPREADER SAFETY
WARNINGS
Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge, or people unfamiliar with these instructions
to use the product. Local regulations may restrict the age
of the operator.
Before working with spreader materials, read the
instructions on the fertiliser or seed packaging.
The spreader material compartment must not be used
for storing unnecessary spreader materials.
Before filling, make sure that the spreader material
compartment is clean.
Wear eye protection and face filter mask while working
with fertilisers and dusty products to reduce the risk of
injury associated with the inhalation of dust.
Do not expose the product to rain or wet conditions.
Operate the product in a recommended position and
only on a firm and level surface.
The product is not for commercial or industrial use, and
must not be used for distributing chemicals, pesticides,
herbicides, liquids, and powder.
Never point the product at yourself or other persons.

ADDITIONAL SAFETY WARNINGS

Some regions have regulations that restrict the use of
the product to some operations. Check with your local
authority for advice. Read all instructions.
Exercise additional caution when using the product near
posts, buildings, or other immovable objects.
The ambient temperature range for the product during
operation is between 0 °C and 40 °C.
The ambient temperature range for the product during
storage is between 0 °C and 40 °C.
The recommended ambient temperature range for the
charging system during charging is between 10 °C and
38 °C.
Beware of thrown objects. Keep all bystanders, children,
and pets at least 15 m away from the work area.
Do not allow children or untrained individuals to use the
product.
Do not operate in poor lighting. The operator requires a
clear view of the work area to identify potential hazards.
Ensure before each use that all controls and safety
devices function correctly. Do not use the product if the
"off" switch does not stop the product.
Inspect the product before each use. Check for loose
fasteners. Make sure that all guards and handles are
properly and securely attached. Replace any damaged
parts before use. Check for battery pack leaks.
Do not modify the product in any way.
Wear full eye and hearing protection while operating the
product. If working in an area where there is a risk of
falling objects, head protection must be worn.
Wear heavy, long trousers, boots, and gloves. Do not
wear loose-fitting clothing, short trousers, jewellery of
any kind, or use with bare feet.
Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
Operating similar tools nearby increases both the risk of
hearing injury and the potential for other persons to enter
your working area.
Do not use the product when you are tired, ill, or under
the influence of alcohol, drugs, or medication.
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance and can result
in serious injury.
Do not touch moving parts. Keep all parts of your body
away from any moving part.
Never pick up or carry the product while it is running.
Turn off the product, and remove the battery pack. Make
sure that all moving parts have come to a complete stop:
before leaving the product unattended
before cleaning or clearing a blockage
before adjusting the working position of the cutting
means
before
checking,
conducting
working on the product
before storing the product
If the product is dropped, suffers heavy impact, or begins
to vibrate abnormally, immediately turn off the product
and inspect for damage or identify the cause of the
vibration. Any damage should be properly repaired or
replaced by an authorised service centre.
Injuries may be caused, or aggravated, by prolonged
use of a product. When using the product for prolonged
periods, ensure to take regular breaks.
maintenance,
or
3
Original Instructions

Advertisement

Table of Contents
loading

Table of Contents