Maintenance; Residual Risks - Ryobi OSS1800 Manual

ADDITIONAL BATTERY SAFETY WARNINGS
■ To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse the
product, battery pack, or charger in fluid or allow fluid
to flow inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a short
circuit.

MAINTENANCE

■ Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
■ Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. For service, bring the product to an
authorised service centre. When servicing, use only
identical replacement parts.
■ Remove the battery pack before adjusting, maintaining,
or cleaning the product.
■ Keep the product dry, clean, and free from dirt and dust.
■ Do not use water to clean the product.
■ After each use, clean the body and handles of the
product with a soft, dry cloth.
■ Check all nuts, bolts, and screws at frequent intervals
for proper tightness to ensure that the product is in safe
working condition. Any part that is damaged should be
properly repaired or replaced by an authorised service
centre.
■ You may only make adjustments and repairs described
in this manual. For other repairs, contact an authorised
service agent.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise during use and the
operator should pay special attention to avoid the following:
■ injury caused by vibration
– Always use the right product for the job, use
designated handles, and restrict working time and
exposure.
■ injury caused by dust and particles
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome.
Symptoms may include tingling, numbness, and blanching
of the fingers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking, and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
4
Original Instructions
■ Take frequent work breaks. Limit the amount of exposure
per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
TRANSPORTATION AND STORAGE
■ Turn off the product, remove the battery pack, and allow
both to cool before storing or transporting.
■ Remove all foreign materials from the product. Store it in
a cool, dry, and well-ventilated place that is inaccessible
to children. For extra safety, store the battery pack
separately from the product. Keep the product away
from corrosive agents, such as garden chemicals and
de-icing salts. Do not store the product outdoors.
■ For transportation in a vehicle, secure the product
against movement or falling to prevent injury to persons
or damage to the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
SYMBOLS ON THE PRODUCT
Safety alert
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
Wear non-slip, heavy-duty protective
gloves.
Beware of thrown or flying objects.
Keep all bystanders, especially
children and pets, at least 15 m away
from the operating area.
Wear eye protection.
Do not expose the product to rain or
damp conditions.
Remove the battery pack before
starting any work on the product.
Do not touch the fan blade.
Regulatory Compliance Mark (RCM).
The product meets applicable
regulatory requirements.