Disassembly Of Cabinet Parts - Panasonic Quasar Omnivision PV-M1326 Service Manual

1-2. DISASSEMBLY OF CABINET PARTS

Model : L
DISASSEMBLY FLOWCHART
This flowchart indicates the disassembly steps of the cabinet
parts and the P.C. Boards in order to gain access to the item(s)
to be serviced. When reassembling, perform the step(s) in the
reverse order.
Caution : Disconnect AC Plug before disassembly.
1 Back Cover
2 VCR Unit
Operation
4 5
CRT
I and
Unit
Operation
II C.B.A.s
8 TV Main C.B.A.
9
VCR Chassis Unit
10
VCR Main C.B.A.
11 Cassette Up Ass'y
12
Mechanism Chassis
Fig. D1
3
Stereo Amp
/TV AVR
C.B.A.
7 Top Shield
6
Power
Plate Ass'y
Supply
Ass'y
DISASSEMBLY METHOD
Step
/Loc. Part Fig.
No. No.
1 Back Cover D2
2 VCR Unit D3-1 P354, Anode Cap,
D3-2 P4702, P4703, P802,
3 Stereo Amp D4-1 4(S-11), (S-12), (L-4),
/TV AVR D4-2 2(L-5), P4602,
C.B.A.
4 CRT Unit D3-1 4(S-2)
5 Operation I D5
and Operation
II C.B.A.s
6 Power Supply D6
Ass'y
7 Top Shield D6
Plate Ass'y
8 TV Main D7
C.B.A.
9 VCR Chassis D8
Unit
10 VCR Main D9
C.B.A.
11 Cassette Up D10 2(S-9), 2(S-10)
Ass'y
12 Mechanism D10
Chassis
A B
C
How to read chart shown above :
A : Order of steps in Procedure
When reassembling, perform the step(s) in the reverse
order.
These numbers are also used as the identification
(location) No. of parts in Figures.
B : Part to be removed or installed.
C : Fig. No. showing Procedure or Part Location.
D : Identification of part to be removed, unhooked, unlocked,
released, unplugged, unclamped, or unsoldered.
2(S-1)=2 Screws(S-1);
2-5
Remove
10(S-1)
P803 CRT C.B.A.,
DeflectionYoke Connector,
Degaussing Coil Connector
P4604, P4605,
Heat Sink Support Angle
P6001, 6(L-1)
2(S-13), (S-14), P1201,
P801
2(L-6)
5(S-3)
P201, P202, P203, P204,
4(L-2)
2(S-4), (S-5), (S-6), (S-15),
Chassis Angle, (L-3)
(S-7), (S-8), P6002,
P2501, P3501
---------------------------
D
3(L-1)=3 Locking Tabs(L-1)
Note
-
1
2
-
-
3
-
4
5
-
6
7