Toshiba 20DL77 Owner's Manual page 29

To listen to stereo sound:
1
Press MTS on the remote control to display
Audio menu with MTS highlighted.
MTS
Bass
Treble
Balance
Surround
MENU
Back
2
Repeatedly press MTS or press 1 or 2 to
select Stereo.
Note:
• You can leave the MTS feature in Stereo
mode and it will automatically output the
type of sound being broadcast (stereo or
monaural).
• If the stereo sound is noisy, select Mono to
reduce the noise.
To listen to a second audio program on an
analog station (if available):
Select SAP in step 2 above.
Note:
• A second audio program (SAP) can be heard
only on those TV stations that offer it. For
example, a station might broadcast another
language as a second audio program. If you
have SAP on, you will see the current program
on the screen but hear the other language
instead of the program's normal audio.
• If you have SAP on and the station you are
watching is not broadcasting a second audio
program, the station's normal audio will be
output. However, occasionally there is no
sound at all in SAP mode. If this happens, set
the MTS feature to Stereo mode.
Adjusting the audio quality
You can adjust the audio quality by adjusting the
bass, treble, and balance.
To adjust the audio quality:
1
Press MENU, then press 1 or 2 to display
Audio menu.
20DL77_En_new23.indd 29 20DL77_En_new23.indd 29
Chapter 5: Using the TV's features
Audio
Stereo
0
0
0
Off
EXIT
Watch TV
2
Press s or t to highlight the item you want
to adjust (Bass, Treble, or Balance).
Audio
MTS
Bass
Treble
Balance
Surround
MENU EXIT
Back Watch TV
3
Press 1 or 2 to adjust the level.
Selection 1
Bass weaker
Treble weaker
Balance increase the
balance in the
left channel
Selecting the Audio mode
You can select your desired audio settings from
three different modes, as described below.
Mode
Theater for a movie theater fi lled
with a dynamic sound
Vocal for news/dialogue
Memory the sound quality you set
To select the audio mode:
Press AUDIO on the remote control.
The following popup menu appears on-screen.
Theater
Repeatedly press AUDIO to cycle among the
modes.
Selecting the surround sound
1
Press MENU, then press 1 or 2 to display
Audio menu.
2
Press s or t to highlight Surround.
3
Press 1 or 2 to select On or Off.
Note: When Surround is set to On. Balance
control will not be available.
Stereo
50
0
0
Off
Pressing 2
stronger
stronger
increase the
balance in the
right channel
Sound quality
29
6/13/07 3:50:57 PM 6/13/07 3:50:57 PM