Using The Blue Screen Function; Adjusting The Picture - Toshiba 20DL77 Owner's Manual

Using the blue screen function

When a TV is on but not receiving a signal, the
screen typically displays a "snowy" image and
the speakers transmit a "static" sound.
With the blue screen function set to On, the TV
will automatically mute the sound and replace
the snowy image with a solid blue screen
until the TV receives a signal. Once a signal
is received, the normal image and sound are
restored.
To turn on the blue screen function:
1
Press MENU, then press 1 or 2 to display
Function menu.
2
Press s or t to highlight Blue Screen.
3
Press 1 or 2 to select On.
Closed Caption
Blue Screen
Panel Lock
MENU Back
To turn off the blue screen function:
Select Off in step 3 above.
20DL77_En_new23.indd 25 20DL77_En_new23.indd 25
Chapter 5: Using the TV's features
Function
C1
On
Off
EXIT Watch TV

Adjusting the picture

Selecting the picture mode
You can select your desired picture settings from
four different modes, as described below.
Mode
Sports Bright and dynamic picture
(factory setting)
Standard Standard picture settings
(factory setting)
Movie Lower contrast for darkened
room (factory setting)
Preference Your personal preferences
To select the picture mode:
Press PICTURE on the remote control.
The following popup menu appears on-screen.
Sports
Repeatedly press PICTURE to cycle among the
modes.
Note:
• The picture mode you select affects the current
input only. You can select a different picture
mode for each input.
• If you select one of the factory-set picture
modes (Sports, Standard, or Movie) and then
change a picture quality setting (for example,
increase the contrast or change the color
temperature), the picture mode automatically
changes to Preference mode.
• In PC input mode, this model is not available.
Picture quality
25
6/13/07 3:50:56 PM 6/13/07 3:50:56 PM