1. Manuals
  2. Brands
  3. XtendLan Manuals
  4. DVR
  5. DS-8000HMI Series
  6. User manual

XtendLan DS-8000HMI Series User Manual

Mobile dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DS-8000HMI Series Mobile DVR
Thank you for purchasing our mobile DVR. This manual is applicable for DS-8000HMI
series mobile DVR. Please read this User Manual carefully to ensure that you can use the device
correctly and safely.
The contents of this Manual are subject to change without notice.
All manuals and user guides at all-guides.com
User Manual of DS-8000HMI Mobile DVR
User Manual
(V2.0)
Page
Total
1
100

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-8000HMI Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for XtendLan DS-8000HMI Series

Summary of Contents for XtendLan DS-8000HMI Series

  • Page 1 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR DS-8000HMI Series Mobile DVR User Manual (V2.0) Thank you for purchasing our mobile DVR. This manual is applicable for DS-8000HMI series mobile DVR. Please read this User Manual carefully to ensure that you can use the device correctly and safely.

  • Page 2: Table Of Contents

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Index Chapter1 Product Introduction....................4 Summary ........................4 Features ........................4 Chapter2 Installation.........................6 Checking the DVR and Its Accessories..............6 HDD Installation .......................6 Physical Interface Description ..................7 Physical Connection....................9 Chapter3 Operational Instructions ..................11 Front Panel ......................11 IR Controller ......................12 Menu Description....................14...
  • Page 3 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR 5.17 Exceptions.......................76 Chapter6 Utilities........................77 Save Parameters ......................77 Restore Parameters....................77 Upgrade........................78 Hard Disk Management ..................79 Clear Alarm Out ......................79 Reboot ........................79 Power Off ........................79 View Log.........................79 System Information....................82 Chapter7 Firmware Upgrade ....................83 FTP Server Setup ....................83...

  • Page 4: Chapter1 Product Introduction

    DS-8000HMI uses the special vibration control solution to fit for vehicle in the roads. DS-8000HMI series device has both the features of digital video recorder (DVR) and digital video server (DVS). It can work stand alone, also be used to build a powerful surveillance network.
  • Page 5 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Preview and playback Support TNC analog moniotor and VGA output for main output Support multiple preview modes. Support sensitive area mask. Support camera spiteful block alarm. Support 2-ch synchronous playback. Support play forward, backward, pause, frame by frame, etc.

  • Page 6: Chapter2 Installation

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Chapter2 Installation Warning: Before you install the DVR, please make sure the power of DVR is switched off. Checking the DVR and Its Accessories When you get the product, check that all the items are included in your product package. There is a list in the package.

  • Page 7: Physical Interface Description

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Physical Interface Description Note: Please refer to actual product. 1. Pin definition Index Pin Definition Interface Shape Comments “DC IN” (12V/24V) is connected with DC IN + + - - 6 pins connector vehicle power, and ‘KEY”...
  • Page 8 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Alarm IN Dry node 4 sensor alarm input G G 1 2 3 4 Alarm Out Dry node 2 relay output 1A 1B 2A 2B RS-485 Dry node PTZ control T+ T- R+ R- Female DB15...

  • Page 9: Physical Connection

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Physical Connection 1. Power connection Connect vehicle battery with DVR “DC IN + + - -”. Connect ignition with DVR “KEY + -”. Connect DVR “DC OUT +12V G” with camera power supply. Connect DVR “DC OUT +5V G”...
  • Page 10 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Connect vehicle battery position pole with DVR “DC IN +”. Connect ignition with DVR “KEY+”. Connect DVR “KEY-” and “GND” pins with vehicle battery GND. Ignition +12V/24V DC IN- KEY- DC IN +...

  • Page 11: Chapter3 Operational Instructions

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Chapter3 Operational Instructions Front Panel LEDs Description Camera1 Status POWER Power Indicator Camera2 Status READY DVR is ready Green means DVR is Camera3 Status STATUS in IR control Camera4 Status LINK Network Link...

  • Page 12: Ir Controller

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR IR Controller Index Name Description POWER Turnoff device. Enable/Disable IR remote control Numeric Keys Same as numeric keys of front panel. EDIT Same as EDIT key of front panel. Same as A key of front panel.
  • Page 13 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Same PTZ key of front panel. Same as ESC key of front panel. Reserved Same as【F1】key of front panel. IRIS, FOCUS ZOOM for lens Lens control control. Same as【F2】key of front panel.

  • Page 14: Menu Description

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Menu Description 3.3.1 Menu Items Menu Name Function Menu Name Function Camera name and position setup Video standard Adjust Brightness, Contrast, Hue Brightness and Saturation Menu transparency OSD Display mode, position and Unit name OSD format setup...

  • Page 15: Menu Operation

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Restore parameters Upgrade firmware Text input mode HDD management ATM IP address Clear alarm output Transaction Utilities ATM type Reboot Text information Power off View log System information 3.3.2 Menu Operation How to enter into menu mode Press【MENU】key to enter into DVR main menu.
  • Page 16 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Each menu contains different kinds of items. There is a small rectangular frame named “Active Frame” which is pointing to the selected item. This “Active Frame” can be moved by 【...

  • Page 17: Character Input

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Character Input In the menu interface, if you enter into edit status (for example, in the “camera name” edit box), at the bottom of screen, the input status is appeared: Here it means you can press numeric keys to input digital number.

  • Page 18: Chapter4 Basic Operation Guide

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Chapter4 Basic Operation Guide Power on Note: Please make sure the power supply matches DVR and AC cable connected correctly. Before switch DVR on, please connect one monitor with VOUT or VGA interface. Otherwise, you can not see graphic user interface and can not operate.
  • Page 19 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Camera record status is following: Icon Icon Color Status Description White No video signal Yellow Vdieo input Pink Manual recording Green Real time recording Blue Motion detect recording External alarm recording Camera alarm status is following: Page...
  • Page 20 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Icon Icon Color Status Description White Video signal lost Yellow View tampering alarm Pink Motion&External alarm Green No alarm Blue Motion alarm External alarm Press numeric keys to switch over individual camera preview. If DVR has less than 10 channels, press one numeric key to switch corresponding channel.

  • Page 21: User Name And Password

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR User name and password Note: When DVR is delivered from factory, there is only one default administrator named “admin”, and password is “12345”. The administrator’s name can not be modified, while the password can be modified.
  • Page 22 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Setp 2: Enter into password modification menu Move the “Active Frame” to “Password” icon by using【 】/【 】keys. Press【ENTER】 key to enter into following password menu: Step 3: Input new password Press【EDIT】key to enter into edit box.

  • Page 23: Ptz Control

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR PTZ Control Note: The user must have the “PTZ control” right. PTZ control interface In preview mode, press【PTZ】key, in the login dialog, select one user name and input the correct password, you can enter into PTZ control interface.
  • Page 24 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR 【LIGHT/F1】; Light control key: Auxiliary device control key:【AUX/F2】 Adjust preset description In PTZ control mode, press【REC/SHOT】key, and press the preset number (three numeric keys), DVR will adjust the corresponding preset number. Repeat pressing【REC/SHOT】key, and press the preset number, DVR will adjust that preset number.

  • Page 25: Manual Record

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Manual Record Note: The user must have the corresponding right, DVR has HDD and HDD is formatted already. Manual record In preview mode, press【REC】key, in the pop-up login dialog, select the name and input the correct password, you can enter into the “Manual Record”...

  • Page 26: Playback

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Playback Note: The user must have “Playback” right. Playback interface In preview mode, press【PLAY】key, in the pop-up login dialog, select username and input correct password, you can enter into “Playback” interface. In menu mode, press【PLAY】key, you can enter into “Playback”...
  • Page 27 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Second: If DVR support 2-ch playback, you can use【↑】or【↓】key to select the second channel except the main channel. These two channels can be playback synchronously. If you select the second channel as none, only the main channel is playback.
  • Page 28 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR If the matched files are more than 8, you can use “Page No.” to select page (use numeric keys or【↑】 【↓】keys to select page). In the file list box, use【↑】 【↓】keys to move the scroll bar to the file, press【ENTER】key to playback the file.
  • Page 29 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR One Channel Playback Two Channels Playback At the bottom of image, there is an information bar and the following information is included: Volume, Play Progress, Play Speed, Played Time and File Total Time. Display/Hide information bar: 【MENU】...
  • Page 30 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Note: When DVR is busy, if you select high play speed, maybe there is difference for actual play speed. Exit playback In playback interface, press【ESC】key to enter into preview mode. In playback interface, press 【MENU】...

  • Page 31: Backup Recorded Files

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Backup Recorded Files Note: The user must have “Playback” right. Please connect with backup devices before you start to backup. In the playback interface, you can backup the recorded files. In the preview mode, press【PLAY】key, in the login dialog, select username and input the correct password, you can enter into the playback interface.
  • Page 32 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Step 2: Select the files that you want to backup In the file list box, use【↑】or【↓】keys to move the scroll bar. When the scroll bar stays at the file you wan to backup, press 【...

  • Page 33: Shut Down Dvr

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR You can use our file player software to playback the video segment in PC. You can find the player software in attached CD. Exit playback interface Please refer to chapter 4.6. Shut Down DVR Note: Do not switch off the power directly in case of damaging HDD.
  • Page 34 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR When DVR is run, if you switch off the power, the HDD in DVR will be damaged. Please avoid such operation. Take away the power cable Please avoid taking away the power cable directly. Note: In some cases, when the power supply is abnormal, DVR will be damaged.

  • Page 35: Chapter5 Parameters Setup Guide

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Chapter5 Parameters Setup Guide Only the users that have “Parameters Setup” right need read this chapter. When the following parameters are modified and saved, you must reboot the DVR to make the new parameters take into effective.
  • Page 36 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR In the user name list box, only “admin” is existed. You can use【→】key, move “Active Frame” to password edit box, and press 【 EDIT】 key to enter into edit status. Press numeric keys to input the new password.

  • Page 37: Add And Delete User

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Add and Delete User Enter into “User Management” interface. Add user The steps are following: Step 1: Enter into “User Management” menu Please refer to chapter 5.1 Step 2: Add new user name In the “User Management”...
  • Page 38 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR numeric keys to input the new password. Step 3: Setup the rights for new user The new added user has not any operational rights. You must setup rights for him. In the users list box of “User Management”...
  • Page 39 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Parameters Setup: Locally setup the DVR parameters; Log: Locally view the log on DVR; Utilities: Locally upgrade firmware, format HDD, reboot DVR and shut down DVR, etc. “Remote Rights”: PTZ Control: Remote control PTZ;...

  • Page 40: Unit Name And Device Id

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Unit Name and Device ID Unit name In the “Display” menu: There is an item named “Unit Name”. The default unit name is “Embedded Net DVR”. Move “Active Frame”...

  • Page 41: Video Output Standard And Vga Setup

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Video Output Standard and VGA Setup Video output standard There is one VOUT BNC connector at the rear panel of DVR. It is used to connect with analog monitor and can support PAL or NTSC video output.

  • Page 42: Osd Setup

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR OSD Setup OSD is abbreviation of “On Screen Display”. For our embedded DVRDVS, it includes displaying system time and camera name. OSD settings include: System time, time format, time display position, camera name, camera name display position, etc.
  • Page 43 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Display mode: There are several display modes: Opaque&Steady, Transparent&Steady, Transparent&Flashing, Opaque&Flashing, Move “Active Frame” to “OSD” item, you can select one mode. Display position and format: Move “Active Frame” to “Position” button on the right side of “OSD”, press 【ENTER】to enter into setup image, you can find there are 22*18 (for NTSC, 22*15) small panes, and OSD position is in red.
  • Page 44 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Step 2: Move “Active Frame” to camera name edit box, press【EDIT】key to enter into edit status, you can input digital number, uppercase and lowercase characters (refer to Chapter 3.4). The camera name can support 32 characters.

  • Page 45: Video Parameters Setup

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Video Parameters Setup For different camera and different background, in order to get the best video image, you need to adjust video parameters such as brightenss, saturation, contrast and hue, etc. You can setup the camera individually, and also you can copy the video parameters of one camera to any other cameras.

  • Page 46: Mask Area Setup

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Mask Area Setup In some cases, maybe you want mask the sensitive area. This area will not be preview and recorded. The mask area setup steps are following: Step 1: Enter into “Image Setup”...
  • Page 47 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR press 【EDIT】 key, the yellow pane will be turned into red, then you can use 【↑】 【↓】 【→】 【←】 keys to extend the red pane. This red area is the mask area. After you make sure the red mask area, press 【...

  • Page 48: View Tampering Alarm

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR View Tampering Alarm If you enable this function, when someone blocks the camera spitefully, DVR will make warning alarm. Step 1: Enter into “Image Setup” memu: Step 2: Select camera: Please use【 】 【 】keys to select one camera. Step 3: Select sensitivity: You can use【↑】...
  • Page 49 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Step 6: Alarm schedule setup: When there is view tampering alarm happened, DVR will handle the alarm based on the schedule. You can set 4 periods for each day one week. Also you can copy the schedule of one day to other days.

  • Page 50: Video Loss Alarm

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Video Loss Alarm When the video cable or camera has something wrong, the video image is lost. If you enable video loss alarm, in such case, DVR will make alarm. Step 1: Enter into “Image Setup”...
  • Page 51 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR effective. Step 5: Setup alarm policy: You can select one or more response solutions, including “On Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm Output”. You can use 【↑】...

  • Page 52: Motion Detection Alarm

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR 5.10 Motion Detection Alarm If you enable this function, when there is motion detected, DVR will make alarm. Step 1: Enter into “Image Setup” menu: Step 2: Select camera: Use【 】 【 】key to select one camera. Step 3: Select motion detection sensitivity: On the right side of “Motion Det.
  • Page 53 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR The whole screen is divided into 22*18 panes (NTSC: 22*15). There is one yellow panel on the upper left side. The motion area setup steps are the same as that of mask area setup (refer to chapter 5.7).
  • Page 54 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Step 5: Motion alarm policy: Move “Active Frame” to the corresponding “Policy” button of motion detection alarm, press【ENTER】key to enter into “Motiomn Alarm Handle” menu: Step 6: Motion alarm record channel setup: When there is motion alarm happened, you can trigger related camera to start recording.

  • Page 55: Preview Properties

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR such as “On Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm Output”. Description: If “On Screen Warning” is enabled, when there is motion alarm happened and DVR is in preview mode, DVR will pop-up the related camera.
  • Page 56 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR DVR has only 1 channel, you can select only “1 Screen” option. If DVR has 4 channels, there are “1 Screen” and “4 Screen” options. If DVR has more than 4 but less than 9 channels, there are “1 Screen”, “4 Screen”...

  • Page 57: Recording Setup

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR 5.12 Recording Setup In main menu, there is an icon named “Recording”. You can enter into recording menu as following: “Recording” menu description: If HD Full: There are two options: “Overwrite” and “Stop recording”. If you select “Overwrite”...
  • Page 58 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR resolution real time. DS-8004HMI: 4-ch video input and 4-ch audio input. All channels can max support CIF compression resolution real time. Note: If you change this resolution option, please reboot DVR to make it into effective. Bit Rate Type: There are two options: “Variable”...
  • Page 59 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR PostRecord Time: When external alarm or motion alarm is stopped, DVR will continue recording time. The options are: 5 Seconds (default), 10 Seconds, 30 Seconds, 1 Minute, 2 Minutes, 5 Minutes and 10 Minutes.
  • Page 60 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR other days. Step 5: Save Press “Confirm” back to “Recording” menu. Press “Confirm” again to save the parameters and return main menu. None all day recording setup Step 1: Enter into recording schedule menu In recording menu, use【ENTER】or【EDIT】key to enable record function (“...

  • Page 61: External Alarm Input And Relay Output

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR and return main menu. Note: If record type is “Motion Detect” or other related types, you must setup “Motion Detection” in order to trigger motion recording (refer to chapter 5.10). If record type is “Alarm”...
  • Page 62 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Step 4: Alarm trigger record channel setup You can select channels to record for each alarm input. In the sub menu, you can use 【ENTER】or【EDIT】key to enable record channel. “×” means disable and “ means enable. Note: In order to trigger the channel to record, in “Recording”...
  • Page 63 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR First select one camera, then select one of following PTZ linkage: Preset: Set the flag as “ ” to enable preset, in the preset number edit box and input one preset number that has been setup already.
  • Page 64 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR “Schedule” button on right side of “Alarm Out Time” item, press【ENTER】key to enter into the corresponding schedule menu: Step 4: Setup alarm out schedule Like other schedule setup, you can set 4 time periods for one day and 7 days for one week. When you finish setup, press “Confirm”...

  • Page 65: Network Parameters

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR 5.14 Network Parameters If you want use network to access DVR, you must setup network parameters. Note: If any network parameter is modified, you must save and reboot DVR to make it into effective.
  • Page 66 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR dynamic IP. This DNS is special software, not the normal domain name server. You can use the provided SDK to develop this DNS software. Multicast IP: It is one D-class IP address, among 224.0.0.0 --- 239.255.255.255. If you do not use multicast function, you do not need to set.

  • Page 67: Ptz

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR 5.15 PTZ There is one RS-485 port at DVR rear panel used for PTZ control. You can setup RS-485 parameters to match your PTZ protocol. In main menu, move “Active Frame” to PTZ icon and press【ENTER】key, you can enter into PTZ menu as following: PTZ menu description Select channel: Select one PTZ camera.
  • Page 68 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Sequence setup: Each sequence is made up of several curise points. Each cruise point includes one preset number, dwell time and dwell speed. Please make sure the PTZ you are using can support sequence function before you start to setup.
  • Page 69 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR In “PTZ” menu, press “Setup” button on the right side of “Sequence No” item, you can enter into “Sequence” setup menu: In “Sequence” setup menu, first input the sequence number. The sequence is among 1 --- 16. Each sequence is made up of cruise points, and each cruise point includes preset number, dwell time and dwell speed.
  • Page 70 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Press “RecCru” button, you will enter into “PTZ control” interface. You can start controlling PTZ with direction keys, press【ENTER】to save the operation track and return “Cruise” setup menu.

  • Page 71: Rs232 Setup

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR 5.16 RS232 setup There is one RS-232 port at DVR rear panel. In main menu, move “Active Frame” to “RS232” icon and perss【ENTER】key, you enter into “RS232” setup menu: RS232 menu description RS-232 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc.
  • Page 72 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Username, password and Verify password: Only used when work mode is “PPP”. Used for login when remote PC dialup through PSTN. Phone: Only used when work mode is “PPP” and PPP mode is “Active”. It is the phone number of remote PC.
  • Page 73 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Step 3: Save setup In “Recording” menu, press “Confirm” button to save parameters. Step 4: Setup Modem used on DVR side Use DCE calbe to connect Modem with PC serial port.
  • Page 74 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Page Total...
  • Page 75 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Step 3: Establish the dialup connection Select the Modem connected with PC just like the dialup network connection, input the telephone number connected with DVR’s modem. Input the username, password. They must be the same as that DVR PPP setup.

  • Page 76: Exceptions

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR 5.17 Exceptions The exceptions can be handled at present include: hard disk full, hard disk error, illegal access, IP address conflict, network failure, and NTSC/PAL differ. Enter into “Exceptions” menu: Including the following handle methods: Audible Warning: DVR beep warning.

  • Page 77: Chapter6 Utilities

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Chapter6 Utilities There are many tools in “Utilities” menu. Including “SavePara”, “RestorePara”, “Upgrade”, “Hard Disk”, “Stop Alarm Out”, “Reboot”, “Power Off”, “View Log” and “System Info”. Enter into “Utilities” menu: Save Parameters Save factory default parameters into FLASH memory.

  • Page 78: Upgrade

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Upgrade You can use this function to upgrade the firmware. Please confirm the language is matched. Press “Upgrade” icon, in the pop-up dialog, you can select either “FTP” or “USB” upgrade mode.

  • Page 79: Hard Disk Management

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Hard Disk Management Check HDD work status Capacity, Free space, Stand by or not, Normal status or not. Format HDD Before formatting stop all recording. After formatting, you must reboot DVR, otherwise DVR will not work normally.
  • Page 80 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR If you want to view the log based on default option, just press 【 ENTER】 key. DVR will list all matched information. Also you can select options to search (By Type, By Date, By Type&Date). By Type To view log information of the assigned type.
  • Page 81 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR box, the information includes: Index, Occur Time, Major Type, Minor Type, Panel User, Net User, Host Address, Para. Type, Channel No, HDD No, Alarm In and Alarm Out. You can press “More Info”...

  • Page 82: System Information

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR System Information Press “System Info” icon in “Utilities” menu, you can get DVR system information: Page Total...

  • Page 83: Chapter7 Firmware Upgrade

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Chapter7 Firmware Upgrade The DVR firmware is stored in FLASH ROM. You can use DVR upgrade function to write the firmware file (digicap) into FLASH. There are two cases that you need to upgrade DVR firmware. One is update old firmware. The other is when the code in DVR FLASH is crashed.
  • Page 84 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Select “Users/rights” under “Security” menu item. The following dialog box will be pop-up. Create new user. Click “new user’. New user dialog pops up. Input user name “target”. Click “OK”.
  • Page 85 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR 7. Next time, you need not setup again, just double click and open “wftpd32.exe” to upgrade the DVR/DVS firmware. Page Total...

  • Page 86: Upgrade Mode

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Upgrade Mode Use client software to upgrade the firmware file. You do not need to use ftp server software. Please refer to the client software user manual for detail information. Use “FTP”...

  • Page 87: Appendix Ahdd Capacity Calculation

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Appendix A HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording (video recording type and video file storage time). Step 1: According to Formula (1) to calculate storage capacity that is the capacity of each channel needed for every hour, unit Mbyte.

  • Page 88: Appendix Bdvr Connect Cable Definition

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Appendix B DVR Connect Cable Definition 1 RS-485 connect cable made method Material and tool One twist cable (8 pins), one standard RJ45 connector and one tool special for RJ45. RJ45 introduction Pin definition To make the connect cable according the follows.

  • Page 89: Connect Cable Made Method

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR network hub or switch. The corresponding relationship of the direct cable (2) Use the following method to make the cross network cable when DVR is directly connected with client-end PC. The corresponding relationship of cross cable 3 RS-232 connect cable made method Material and tool...
  • Page 90 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Pin definition To make the RJ45 according to the following pin definition; I means DVR input, O means DVR output. Pin index Name Description Carrier Detect Receive Data Transfer Data Clear Data Request to Send...
  • Page 91 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Connection for RJ45 and DB9 25-pin to 9-pin converter internal connection is defined as following: Connection for DB25 and DB9 (3) When the serial port of DVR is connected with DCE device (like MODEM), one end of the cable is 8-pin RJ45 plug-in, the other end is DB25 pin plug-in, the corresponding relationship is as following: Connection for RJ45 and DB25 (DCE)

  • Page 92: Appendix C Specifications

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Appendix C Specifications Video compression H.264 Preview resolution PAL: 704*576(4CIF) NTSC: 704*480(4CIF) Compression resolution 4CIF/DCIF/2CIF/CIF/QCIF Video input 1/2/3/4 channels TNC (1.0Vp-p, 75Ω) Composite video output 1 channel TNC (1.0Vp-p, 75Ω)) Frame rate PAL: 1/16—25 FPS;...
  • Page 93 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR PAL: 176*144(QCIF), 352*288(CIF), 704*288(2CIF), 528*384(DCIF), 704*576(4CIF); NTSC: 176*120(QCIF), 352*240(CIF), 704*240(2CIF), 528*320(DCIF), 704*480(4CIF). Page Total...

  • Page 94: Appendix D Quick Search Function Table

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Appendix D Quick Search Function Table Type Name Description Index User Create and delete users. System has one default management administrator. The administrator can create 15 users Safety and define their rights.
  • Page 95 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Remote Remote record real time stream. record Remote Remote playback the recorded files in DVR playback Download Download recorded files in DVR. Remote Remote upgrade firmware. upgrade Transparent Remote control serial device connected with serial 5.16...

  • Page 96: Appendix E Troubleshooting

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Appendix E Troubleshooting Failure Possible reasons After plugging in power, turning on the power switch, Power cable is broken. “POWER” light in front Panel does not turn on, and fan Power supply is broken.
  • Page 97 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR password, ect). Old player SDK (playm4.dll) Notes: Place the DVR in well ventilated space so that it operates within the allowed range of temperature and humidity as in specification. If the circuit board is wet, dust on circuit board can cause a short circuit.

  • Page 98: Appendix F Product Service

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Appendix F Product Service Thank you for choosing our products. All of our products users can enjoy a conditional free repair guarantee service for hardware within 12 months starting from purchase date, and a free exchange service within one month (valid for the damage caused by non personal acts).

  • Page 99: Appendix G Customer Information Card

    All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Appendix G Customer Information Card User’s Mr./Mrs. Name Company Name Post Address Postcode Phone Number E-mail Model Number of Product Serial Number of Product Purchase Date Distributor Page Total...
  • Page 100 All manuals and user guides at all-guides.com User Manual of DS-8000HMI Mobile DVR Suggestions: Page Total...

Table of Contents