Denon PERL PRO Owner's Manual page 12

Contents
Checking the earbuds battery and
charging case battery
The charging case has 3 RGB LEDs which turn on for 4 seconds when
opening the lid. They indicate the level of charge of:
q
A Left earbud
B Charging case
C Right earbud
Red LED = battery below 30%
0
Yellow LED = battery between 30% - 70%
0
Green LED = battery above 70%
0
You can check the exact battery level of your earbuds via the Denon
Headphones app: while wearing your earbuds, open the Denon
Headphones app and check the battery indicator in the top-right corner of
the screen.
A voice prompt will announce "battery low" when your earbuds needs
charging.
A voice prompt will announce "battery critical" when your earbuds is about
to power off.
Basic part Advanced part
w e
Headphones app Troubleshooting
Using the earbuds touch buttons
The earbuds has touch buttons on each side that you can tap to perform
useful functions.
o You can customize your touch buttons in the
Denon Headphones app
1
Open the Denon Headphones app with your earbuds
connected via Bluetooth to your device.
2
Tap on the menu icon at the top left (
3
Tap on "Device Settings" > "Configure touch buttons".
4
Choose the tap controls you wish to adjust.
12
Appendix
) .