Samsung S49CG95 E Series User Manual page 33

2nd 3rd
Input Port Ver.
Auto Source Switch+
Key Repeat Time
Power LED On
Setup Custom Key
Best Brightness
Minimum Brightness
VRR Control
Description
Select an HDMI version. (1.4 / 2.0↑)
― The supportable device and resolution may differ depending on its version.
― When the version is changed, the screen may blink.
― If you set the HDMI mode to 1.4, some high resolutions may not be supported because of bandwidth limitation of the HDMI 1.4 protocol.
― When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the device.
― Set HDMI mode to
1.4 if the monitor is connected to an HDMI device and the monitor does not display the screen properly, displays a blank screen, or does
not play sound at all.
By activating, a new connected source is displayed automatically.
― This feature is available only when the monitor is turned on.
Control the response rate of a button when the button is pressed.
Acceleration, 1 sec, or 2 sec can be selected. If
Configure the settings to enable or disable the power LED located at the lower part of the product.
• Working: The power LED is on when the product is turned on.
• Stand-by: The power LED is on when the product is turned off.
Set the custom key so that your chosen function can be set up directly.
• Eye Saver Mode / PIP/PBP / Refresh Rate
Picture Mode / Response Time
Optimises brightness in real time, based on your lighting environment.
Set the minimum brightness for Monitor screen. This function only works if its value is lower than the value set in the
setting.
― This option is available when
Best Brightness
By optimising the video signal processing, this additional function mitigates screen flicker.
While playing any game or content that causes screen flicker, use the
No Repeat is selected, a command responds only once when a button is pressed.
/ Low Input Lag / Black Equalizer / Virtual Aim Point
is set to On.
VRR Control function with setting it to On.
/ Infinity Core Lighting / Auto Source Switch+
Picture menu's Backlight
/
33