Table of Contents
Advertisement
X570 Creator
SoC/Uncore OC Voltage
Specify the SoC/Uncore voltage (VDD_SOC) in mV to support memory and
Infinity Fabric overclocking. VDD_SOC also determines the GPU voltage on
processors with integrated graphics.
"SoC/Uncore OC Mode" need to be enabled to force this voltage.
SMT Mode
This item can be used to disable
symmetric multithreading. To re-enable SMT, a
power cycle is needed after selecting [Auto].
Warning: S3 is not supported on systems where SMT is disabled.
DRAM Timing Configuration
DRAM Information
Browse the serial presence detect (SPD) for DDR4 modules.
Load DRAM Profile
Load DRAM profile to overclock the memory and perform beyond standard specifications.
Load XMP Setting
Load XMP settings to overclock the memory and perform beyond standard specifications.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically.
Infinity Fabric Frequency and Dividers
Set Infinity Fabric Frequency and Dividers (FCLK).
GFX Clock Frequency
(Only for processor with integrated graphics)
This item allows you to alter the frequency for the GFX clock frequency. After you
alter the GFX Clock Frequency settings, make sure to adjust the GFX Core Voltage
settings.
*The adjustable range is dependent on the CPU being installed.
GFX Core Voltage
(Only for processor with integrated graphics)
This item allows you to alter the voltage for the GFX Core Voltage.
*The adjustable range is dependent on the CPU being installed.
79
Advertisement
Table of Contents
