Summary of Contents for Energizer EZPE20V4A
- Page 1 ORIGINAL INSTRUCTIONS >EN CORDLESS O R B I TAL SANDER EZPE20V4A USER GUIDE CAUTION: Read this manual before us ing this machine!
- Page 2 Let’s get started. You’re excited to power up, so we’ll keep this brief !
- Page 3 Let’s get started. You’re excited to power up, so we’ll keep this brief!
-
Page 4: Table Of Contents
CONTENTS 1. INTENDED USE 2. SAFETY INSTRUCTIONS 3. YOUR PRODUCT 4. TECHNICAL DETAILS 5. OPERATION 6. MAINTENANCE 7. DISPOSAL 8. DECLARATION OF CONFORMITY 9. WARRANTY 10. PRODUCT FAILURE 11. WARRANTY EXCLUSIONS... -
Page 5: Intended Use
1. INTENDED USE This product is intended exclusively for non-professional use for dry sanding of wood, plastic, putty and paintIing surfaces or varnished.This product is not suitable for sanding plaster-based substrates. This product is not intended for commercial use. The generally recognized accident prevention regulations and the security provided must be observed. - Page 6 b) Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
- Page 7 e) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion.
- Page 8 It is better for Li-ion batteries to discharge and reload them regularly (at least 4 times a year). The ideal charge for long-term storage of your Li-ion battery is 40% of capacity. When disposing of batteries, follow the instructions given in the section “Protecting the ...
- Page 9 instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. If the supply cord is damaged, it must be replaced by ...
-
Page 10: Your Product
4. TECHNICAL DETAILS Power supply 20V d.c. No l oad s peed 12000 min-1 Sanding plate dimensions 125 mm Charger type EZPE20V4A Input 220-240V~ 50-60Hz,65W Output 2 1 V d.c.,2.5A Battery type EZPE20V4A 20V d.c. 4Ah Lithium-ion Charging time approx: 100min... -
Page 11: Operation
Information The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another . The declared vibration total value may also be used in a preliminary assessment of exposure. ... - Page 12 Battery capacity indicator There are battery capacity indicators on the battery pack; you can check the capacity status of the battery if you press the button. Before using the machine, please press switch trigger to check if the battery is full enough for properly working.
-
Page 13: Maintenance
6. MAINTENANCE Warning: Remove the battery before inspection, cleaning and repair 6.1 CLEANING Clean the air vents regularly with dry compressed air. Never try to clean by inserting sharp objects into the airvents. Do not use aggressive chemical detergents to clean plastic parts. Various chemicals can corrode and damage parts. -
Page 14: Declaration Of Conformity
BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux - France, declares that, Product:CORDLESS ORBITAL SANDER 20V Model: EZPE20V4A Serial number: 20210359319-20210360318 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration. -
Page 15: Warranty
9. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 16: Product Failure
10. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 17: Warranty Exclusions
11. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 18 NOTES...
- Page 19 NOTES...