Smart Check - Samsung WA16J675 Series User Manual

Before you start
WARNING
If you open the door with the Child Lock enabled, the machine starts forced draining to
prevent accidents such as drowning.
NOTE
The Child Lock remains active after you power off the machine. You cannot deactivate the
Child Lock as long as the "CL" code appears on the display. But, you can deactivate when the
dC code appears by holding down two buttons simultaneously.

Smart Check

To enable this function, you must first download the Samsung Smart Washer app at the
Play Store or the Apple Store, and install it on a mobile device featuring a camera function.
The Smart Check function has been
optimized for Galaxy & iPhone series
(applicable models only).
1. Press and hold Wash and Rinse
simultaneously for 3 seconds to enter
the Smart Check mode.
2. The washing machine starts the self-
diagnosis procedure and displays
an information code if a problem is
detected.
3. Run the Samsung Smart Washer app
on your mobile device, and tap Smart
Check.
4. Put the mobile device close to the
washing machine's display so that the
mobile device and the washing machine
face each other. Then, the information
code will be recognized automatically by
the app.
5. When the information code is
recognized correctly, the app provides
detailed information about the problem
with applicable solutions.
22 English
WA6700JS(PREMIUM)-03515B-01_EN_K_150127.indd 22
NOTE
• The function name, Smart Check, may
differ depending on the language.
• If there is strong reflected light on the
washing machine display, the app may
fail to recognize the information code.
• If the app fails to recognize the Smart
Check code consecutively, enter the
information code manually onto the app
screen.
2015-02-09 11:44:39