Servicing The Engine Oil - Toro TimeCutter ZR 4200T Operator's Manual

Zero turn riding mower
Hide thumbs Also See for TimeCutter ZR 4200T:
Table of Contents

Advertisement

Servicing the Engine Oil

Engine-Oil Specifications
Oil Type: Detergent oil (including synthetic) of API
service SJ or higher
Crankcase Capacity: 1.9 L (64 fl oz) with oil filter; 1.8
L (60 fl oz) without oil filter
Viscosity: See the table below.
Figure 39
Checking the Engine-Oil Level
Service Interval: Before each use or daily
Note:
Check the oil when the engine is cold.
Important:
If you overfill or underfill the engine
crankcase with oil and run the engine, you may
damage the engine.
1.
Park the machine on a level surface, disengage
the blade-control switch, and move the
motion-control levers outward to the P
position.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
Note:
Ensure that the engine is cool so that the
oil has had time to drain into the sump.
3.
To keep dirt, grass clippings, etc., out of the
engine, clean the area around the oil-fill cap and
dipstick before removing it
g359987
ARK
(Figure
40).
32
Figure 40
g373146

Advertisement

Table of Contents
loading

This manual is also suitable for:

Timecutter zs4200t7467774679

Table of Contents