Adding/Removing Z-Wave Devices (via Platinum1050)
Your Platinum 1050 is designed to integrate
seamlessly with a Nexia™ smart home system.
Add
Device
Home
12-5062-03
Adding Z-Wave Devices
1. From the HOME Screen, press MENU, then
press NEXIA.
2. Press ADD DEVICE and follow the device
manufacturer's instructions for setting the
Z-Wave device into learn mode. You will
Z-Wave Bridge
Connected to Nexia
Remove
Device
Z-Wave network active with 2 nodes
Advanced
Back
have four minutes to set the device into
learn mode after pressing the ADD DEVICE
button.
Removing Z-Wave Devices
1. From the HOME Screen, press MENU, then
press NEXIA.
2. Press REMOVE DEVICE and follow the
manufacturer's instructions for setting the
Z-Wave device into learn mode. You will
have four minutes to set the device into
learn mode after pressing the REMOVE
DEVICE button.
Advanced Z-Wave Settings
Press ADVANCED for advanced Z-Wave
functions including unregistering your bridge
from Nexia or factory resetting your bridge. See
the Advanced Z-Wave Settings section for more
information.
page 27