8- Care And Cleaning - Haier HWD80-BP14636 User Manual

GB
To prevent blockage of water supply by solid substanc-
supply.
Unscrew the water inlet hose at the back (Fig. 8-3.1)
of the appliance as well as on the tap (Fig. 8-3.2).
8.4 Cleaning the drum
Remove accidentally washed metal parts such as
pins, coins, etc. from the drum (Fig. 8-4) because
they cause rust stains and damage.
Use a non-chloride cleaner for removing rust
stains. Observe the warning hints of the cleaning
agent manufacturer.
Do not use any hard objects or steel wool for clean-
ing.
Note: Hygiene
For regular maintenance we recommend to run programme HYGIENIC with no load in
order to remove possible corruptive residues quarterly. Add a small amount of deter-
gent in washing agent compartment (2) - or use a special machine cleaner
8-5.1 8-5.2
Note: Hygiene
After long periods of disuse we recommended to run programme HYGIENIC with no
load and small amount of detergent in washing agent compartment (2) or special ma-
chine cleaner to remove possibly corruptive residues.

8- Care and cleaning

8.5 Long periods of disuse
If the appliance is left idle for a longer period:
1. Pull out the electrical plug (Fig. 8-5.1).
2.
3. Open the door to prevent formation of moisture
and odours. Let door open while not used.
Before next usage check carefully power cord, water
inlet and drain hose. Make sure everything is properly
installed and without leackage.
8-3.2
8-3.1
8-4
23