LG LX330 Series Owner's Manual page 38

17. Equalizer (Command : j v)
► To adjust equalize.
Transmission [j][v][ ][Set ID][ ][Data][Cr]
MSB
0 0 0 0
Frequency
7 6 5 Frequency 4 3 2 1 0
0 0 0 1st Band 0 0 0 0 0
0 0 1 2nd Band 0 0 0 0 1
0 1 0 3rd Band ... ... ... ... ...
0 1 1 4th Band 1 0 0 1 1
1 0 0 5th Band 1 0 1 0 0
Ack [v][ ][Set ID][ ][OK/NG][Data][x]
18. Tune Command (Command: m a)
► Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ]
[Data 01][ ][Data 02][Cr]
Data 00 : High channel data
Data 01 : Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don't care
Data 02 : [Antena]
0x00 : Analog Main
0x10 : DTV Main
0x20 : Radio
[Cable]
0x80 : Analog Main
0x90 : DTV Main
0xA0 : Radio
[Satellite]
0x40 : DTV Main
0x50 : Radio Main
Channel data range
Min: 00 Max: 270F (0 to 9999)
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
Data Min: 00 to Max: 7DH
LSB
0 0 0 0
Data
Step
0(decimal)
1(decimal)
...
19(decimal)
20(decimal)
19. Programme Add/Skip (Command: m b)
► To set skip status for the current Programme.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
20. Key (Command: m c)
► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data IR CODES
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
21. Control Back Light (Command: m g)
► To control the backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
01 : Add
7