Advertisement
S
martDiagnosis
1
Close the washer door, and press the POWER button.
2
Place the phone to SmartDiagnosis
3
Long press Temp button to activate smart diagnosis.
4
Hold the phone while data is transmitted.
5
After the data transmission is completed, listen to the diagnosis result from the consultant.
NOTE
Smart Diagnosis is a troubleshooting feature designed to assist, not replace, the traditional
method of troubleshooting through service calls, The effectiveness of this feature depends upon
various factors, including, but not limited to, the reception of the cellular phone being used for
transmission, any external noise that may be present during the transmission, and the acoustics of
the room where the machine is located. Accordingly, LG dose not guarantee that smart Diagnosis
would accurately troubleshoot any given issue.
TM
• If you manipulated other button or dial before pressing
Temp. button, turn off the power and start again from
the beginning.
display.
TM
• Make sure that the speaking
side of the phone to face
SmartDiagnosis
• Place the phone near the
SmartDiagnosis
long press Temp. button until
tak tak tak sound.
Note : Before pressing the Temp.
should turn the power button
for reuse if you have made other
operations. If under the condition
" CL" uninstall it, and reconnect
the power
• Keep placing phone to SmartDiagnosis
data for smart diagnosis is being transmitted. The time
remaining for data transmission will be displayed on screen.
• Transmission sound may be irritating. For proper diagnosis, do
not take off the phone. You can press power button to stop
diagnosis function and the sound.
• When data transmission is completed, the power is
automatically turned off with "End" display after a few
seconds.
display
TM
Display, and
TM
37
display while
TM
Advertisement
