ZOTAC ZBOX nano
10. Click "Finish" to finish the configuration.
11. Enter your user name and password. Click "Connect" to connect to the internet.
Note: Contact your internet Service Provider (ISP) if you have problems connecting to the network.
Configuring audio output
Follow the steps below to enable audio output when connecting the ZOTAC ZBOX nano to a
TV or receiver via DP/HDMI adapter.
1.
Access the Sound settings via the system
Control Panel.
2.
Under Playback devices, click the display device
that corresponds with your audio compatible
display.
3.
Click the "Set Default" button in the lower right
hand corner.
4.
Click "OK" to exit the setup.
20
291-MB362-03