When Using Ulead Dvd Moviefactory For Toshiba; How To Make A Dvd-Video - Toshiba Satellite U305-S2804 User Manual

Data Verification
To verify that data is written or rewritten correctly, follow the steps below
before you write or rewrite a Data CD/DVD.
1. Display the setting dialog box by one of the following two steps:
■
■
2. Mark the Verify Written Data check box.
3. Select File Open or Full Compare mode.
4. Click the OK button.

When Using Ulead DVD MovieFactory for TOSHIBA

How to make a DVD-Video

Simplified steps for making a DVD-Video from video data captured from a
DV-Camcorder:
1. Click
Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD
MovieFactory.
2. Insert a DVD-RW or DVD+RW disc in Burner.
3. Click Video Disc
dialog box, choose DVD-Video/+VR to invoke Straight Capture to
Disc Page.
4. Choose DVD-Video format.
5. Confirm the capture source is DV.
6. Press Capture button.
Simplified steps for making a DVD-Video from adding video source:
1. Click
Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD
MovieFactory.
2. Click Video Disc
project type, then invoke DVD MovieFactory.
3. Add source from HD Disk by click Add video files button to invoke
browser dialog box.
4. Choose the source video then go to Next page to apply Menu.
5. After choose the menu template, press Next button to go to Burning
Page.
6. Choose the output type then press Burn button.
User's Manual
Click the setting button (
Data Disc mode.
In the Settings menu, select Settings for Each Mode, then Data
Disc.
All Programs
Burn Video to Disc to launch Direct Recording
All Programs
New Project to invoke 2
) for writing on the main toolbar in the
DVD MovieFactory for TOSHIBA
DVD MovieFactory for TOSHIBA
nd
Launcher ,choose your
Operating Basics
4-21