Toshiba Satellite U305-S2804 User Manual page 167

■
The way to move to multi-monitor Intel
■
■
■
■
■
2. In some cases DVD video playback images may not be displayed when
the display of the computer and a CRT display are used at the same.
Reduce the resolution, use the display of the computer only, use the
CRT display only or set display device in the multi-monitor, then play
DVD.
■
3. The DVD video overlay is not displayed when the display mode of CRT
display is set to high resolution and high refresh rate mode.
Please decrease the resolution and refresh rate of CRT display.
4. When the display mode is simultaneous LCD (internal liquid crystal
display) and the system goes into Sleep Mode or Hibernation Mode,
you can switch to the LCD (internal liquid crystal display) display mode
by pressing Fn + F5. Under this environment, however, you may not
return to the simultaneous LCD (internal liquid crystal display) display
mode.
In these cases, perform the following steps:
In Advanced feature of Display Settings. Select the Display Devices
tab, click the icon indicating a display device (display mode) you want to
use.
User's Manual
Switch to Display Settings, like shown in previous page.
Click Advanced Settings in Display Settings.
Click Graphics Properties in Intel
Driver for Mobile tab.
Select Displays Devices tab in (Multiple Monitors) and Intel
Express Properties.
With external monitor connected, click on the
Multiple Display, then select OK.
Display Properties
Please refer to External monitor
the application guide for the setting of each display device.
Display Controller and Modes
®
965 Express
®
Graphics Media Accelerator
button under
(Multiple Monitors) and Intel
Express Series Properties
in Chapter 8, Optional
®
965
®
965
Devices, or
B-7