Table of Contents
Advertisement
en operation
Requirements
The laundry is prepared and sor-
¡
ted.
→ "Laundry", Page 26
The drum is empty.
¡
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.5 Inserting the measuring
aid for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
Pull out the detergent drawer.
1.
Press down on the insert and re-
2.
move the detergent drawer.
Insert the measuring aid.
3.
Insert the detergent drawer.
4.
28
13.6 Adding detergent and
care product
Notes
Do not use the measuring aid for
¡
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
Observe the information about de-
¡
tergents and care products
→ Page 27.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 17
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.7 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 27
Press
Start / Reload .
▶
The display shows the programme
a
duration or the programme end
time.
After the programme has ended,
a
the display shows: "End" .
13.8 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
The programme is set.
¡
→ "Setting a programme", Page 27
The programme end time is set
¡
and activated.
→ "Buttons", Page 22
Press
Start / Reload .
1.
The activated programme end time
is paused.
Press
Finish in until the dis-
2.
play shows the required pro-
gramme end time.
Advertisement
Table of Contents
