To Access The Basic Settings - Siemens EX8 LY Series Instruction Manual

Display Function
Configuring activation of the flexible cooking zone
™‚„
‹ As two independent hotplates.
‚ As a single hotplate.*
Connecting the wireless temperature sensor to the hob
™‚...
‹ Connected correctly
‚ Not connected correctly: Transmission error.
ƒ Not connected correctly: Temperature sensor fault.
Restoring the factory settings
™‹
‹ Individual settings.*
‚ Restore factory settings.
* Factory settings

To access the basic settings:

The hob must be off.
Switch on the hob.
1.
Within ten seconds, touch and hold the
2.
for approximately four seconds.
The first four displays provide product information.
Touch the settings area to view the individual
displays.
Product information
After-sales service index (ASSI)
Production number
Production number 1
Production number 2
Touching the symbol again takes you to the basic
0
3.
settings.
and light up as a presetting in the displays.
™‚ ‹
Touch the symbol repeatedly until the required
0
4.
function is displayed.
5.
0 symbol
Display screen
‹‚
"š
Š† .
6.
‹ . †
The settings have been saved.
Leaving the basic settings
Turn off the hob with the main switch.
Then select the required setting from the settings
area.
Touch the symbol for at least four seconds.
0
Basic settings
en
35